Showing posts with label Motorcycle Maintenance. Show all posts
Showing posts with label Motorcycle Maintenance. Show all posts

October 15, 2012

Looking out - How not to suck

In a previous entry I flippantly referred to my motorcycle side mirror that was missing a nut, and how I was a huge jerk for not just getting it fixed since I knew more or less what I was doing and exactly what I'd need to get it done.

Well, riding home from work one day last week I heard the familiar sound of a small metal nut loosing from my bike and dinking it's way to the street below. Now, this noise could have been anyting: I could have run over a screw, or a car could have been clicking nearby, it didn't mean that my bike had just lost one of the precious securing devices that keep it in one piece. But I knew, somewhere deep inside, what it really was.

It wasn't until the next morning that I found out for sure. My mirror was now free to do as unsecured major visual apparatus usually do in moving vehicles: cause havoc. During a lean it shimmied a half-inch out of it's hole and I overcorrected for what had appeared to be the bike falling over by screaming like a little girl and riding nearly into a ditch. The rest of my ride was a disgruntled attempt to keep the mirror secured to my jacket without punching two new screw holes in my torso.

I want to make it loud and clear that I was literally taking my life into my own hands by not fixing this earlier: that nut could have ended up in my chain or wedged into any moving part of my bike that would have resulted in a short and likely fatal lesson in dancing with traffic. I managed to scrape by and didn't even check to see what had happened, putting myself in danger twice.

That weekend I took the freewheeling device and the freewheeling girlfriend in the car to home depot to determine the nut sizing and grab a socket wrench extension. Anyone who has worked on a bike will tell you the less often you need to dismantle things the better, and the extension would allow me to tighten it without taking apart the entire head.

Home depot is the only place where I have no shame in talking to a sales rep. I don't know if it has something to do with the inviting atmosphere of warehouse/dungeon or the cheerfully colored Halloween vests, I just feel secure among the 5-story tall bathroom fixtures and grow op hardware. I cornered the first terrorized employee in orange and grilled him for information on where to find hardware.

"Good day good sir. Might you point me towards the nuts aisle that I might repair this symbol of my irresponsibility?"
"What? Uh hardware is in aisle 9."

Off we went and shortly I had accosted another victim. He took the mirror with only my muted attempt to inform him of its metric nature in mind and quickly located the nut I needed. Before leaving I told him I appreciated his handling of my nuts and asked where I could go to find a socket wrench extension. This is not a remark that the hardware isle reps find humorous.

Final stop was the tool section where I shopped extensions for ten minutes. Did I have a Husky or Craftsman back home? Was there a difference? What if one of them was metric and the other was imperial? If I buy one and I'm wrong I'll have to go through the intense embarrassment of a tool return, which as we all know involves surrendering your man card to the authorities.

"Hi, I want to return this extension."
"Was it defective?"
"Uh, no."
A pregnant pause.
"Is there something wrong with the device?"
"Nope."
The clerk becomes suspicious. He narrows his eye and sizes me up. "Sir, did you purchase the wrong extension?"
"Possibly."
"Get out sir."
"But-"
"Sir, don't make me repeat myself."

Becoming bored of my silent reverie of several minutes (I'm prone to retreating into a fantasy world when I've been given too many options) my girlfriend finally got tired and pointed out a full metric set with a snake extension that was about the same price as the solid extension I was agonizing over. We then narrowly avoided the armed Home Depot security guards and absconded with the merchandise through trickery and deceit.

Pictured: Trickery and deceit

There's not much to it after that, I reinstalled my mirror and fitted the nuts on by hand before turning to my new best friend to tighten them up. The mirror is no longer a problem and I learned a valuable lesson about not procrastinating.

Note: I was originally going to end this with one of those goofy half-sentences like I can't ever finish anything but then two weeks later I peeked at my post drafts and noticed I'd never posted it, so I think that seals it then, no?

July 19, 2012

Oil Changes

Anyone that knows me well knows I'm not all that handy. I most recently got a reminder when I busted my motorcycle mirror at the stem (bear combat) and tried to replace it. Despite the realization I could have used a socket wrench with a 6in extension to save me 2 hours of work, the actual disassembly and reassembly of the dash went fine... except that I didn't tighten one of the mirror nuts enough and it ejected while I was riding a few days after my 'repair'.

I don't want to go on a tangent, but I feel it's important to note I'm terribly lazy and it's still an issue. Anyway, I finally decided it was about damn time to get my 1000 mile checkup (at 1,150 miles) so I went to call my dealership/mechanic...

They are closed. Like super closed. So closed that the old building is being used to sell "As Seen On TV" shit.

So I turned to some friends, then coworkers for a bike mechanic. The leads didn't pan out so I ran to the source of all solid advice: the internets. I posted on the r/Motorcycle reddit and was informed that the 1,000 mile maintenance isn't anything technical, just an oil change (important for a new motor), tire pressure checks and tightening shit. I thought, "I can tighten shit! I check tire pressure! What's all this about oil though?"

Bear in mind the last thing I wanted to do after the (ongoing) mirror fiasco was get too involved with maintenance. If I'm anything I'm contradictory and as such I commenced youtubing and googling.

Autozone nearby claimed they had the parts I needed so the girlfriend and I piled into my car and made a quick run over that weekend. Surprise surprise though, someone fibbed. The attendant was a good guy and told me of a nearby Autozone and Advance that carry motorcycle stuff. Still annoyed at the 'zone I punched us over to Advance and found all my stuff.

In the morning I went out with my pan, oil, oil filter, oil filter wrench, and acquired my tool kit from the seat storage. I was ready.

My girlfriend meandered out to watch. I suspect she wanted either to see me sensationally burn myself while ruining my engine block and/or to make snide comments about how little I knew about what I was doing. And she fulfilled her quota on the latter many times over while I struggled with "righty-tighty lefty-loosey" (Protip: If the screw is upside down, it's backwards) and socket wrench operation.

Pictured left - Celebratory whiskey that happens to be proper color of oil, right - my oil
But my bike is purring like a kitten! I've learned a lot and I'll never have to pay for another oil change for my bike.

I spent all of $30 for all the supplies but took away some good stuff.
1) Doing your own maintenance is cheap
2) Knowing you did what you were supposed to is nicer then wondering if a mechanic is honest
3) Girls are not particularly impressed by oil changes
4) Riding a bike after you've worked on it is awesome